Water-Absorbing Dam 8L
Protect your home and property from water damage with the Laba-Tex Water Absorbent Dam! This indoor dam sleeve has high absorption properties in case of unexpected flooding and water leakage. The product is extremely easy to use and the results are amazing! These water absorbents are light grey in colour and should be used with water and non-aggressive liquids that do not contain sodium chloride ions.
The water-absorbing dams are distinguished by their water absorption quantity. The 120 cm x 10 cm dam with the blue loops can absorb an astonishing 8 liters of water - much more than a regular towel, cloth, or roll of paper. Due to its unusual shape it might be called a sleeve or a snake. The dam can be widely used as a preventive measure or in the case of an emergency situation in household, industrial, or commercial premises. Apart from absorbing the water/water-based liquids, it also creates a barrier or enclosure around the source of the water spill, thereby stopping it and preventing further leakage.
Water absorbing dam usage examples:
- To protect personal property from floods.
- Absorb water in hard-to-reach places.
- As a stoppage of spilled liquids and prevention of further leakage.
- When unexpected water leakage occurs, e.g., absorbs dripping water from household appliances (washing machine, radiator/refrigerator/air conditioner) in case of product breakage, pipe leakage, etc.
- To lay around industrial equipment.
NOTE:Â Before use, store the water absorbing sleeve tightly closed, in a dry and clean place. Protect from humidity and direct sunlight.
Technical parameters 1 unit:
| Â Product | Â Water absorbing dam 8 L |
| Â Dimensions | Â 120 cm x 10 cm |
| Â Height at full absorption | Â 10 cm |
| Â Weight | Â ~175 g |
| Â Quantity of water absorbed | Â 8 L |
| Â Colour | Â Grey, blue loops |
|  Filler |  Cellulose-based absorbent  polymer |
| Â Outer fabric | Â Polyester |
| Â Loops | Â Polypropylene |
Â
Technical qualities:
- Absorbs water on contact and converts liquid into gel.
- By swelling with water, dams can be used as a barrier to control and divert in-house flood water.
- Single-use product (absorbs liquid until it becomes saturated).
- For larger spills, use two or more dams.
- Not compatible with salty (NaCl) water and liquid chemicals.
- Grab the water-soaked dam by the loops and dispose of it in accordance with local requirements.
- Environmentally friendly – decomposes over time.
Product photos are for illustrative purposes only and are exemplary. The colours, inscriptions, parameters, dimensions, sizes, functions, and/or any other features of the original products may look different than in reality due to their visual characteristics, so please refer to the product features that are indicated in the product descriptions.
Technical parameters 1 unit:
| Â Product | Â Water absorbing dam 8 L |
| Â Dimensions | Â 120 cm x 10 cm |
| Â Height at full absorption | Â 10 cm |
| Â Weight | Â ~175 g |
| Â Quantity of water absorbed | Â 8 L |
| Â Colour | Â Grey, blue loops |
|  Filler |  Cellulose-based absorbent  polymer |
| Â Outer fabric | Â Polyester |
| Â Loops | Â Polypropylene |
Â
Technical qualities:
- Absorbs water on contact and converts liquid into gel.
- By swelling with water, dams can be used as a barrier to control and divert in-house flood water.
- Single-use product (absorbs liquid until it becomes saturated).
- For larger spills, use two or more dams.
- Not compatible with salty (NaCl) water and liquid chemicals.
- Grab the water-soaked dam by the loops and dispose of it in accordance with local requirements.
- Environmentally friendly – decomposes over time.
Supplier Name : Arm Technology - Lithuania
Arm Technology - We are Lithuanian manufacturers of products that absorb water and water-based liquids. Due to the advanced production technology - the absorbent polymers used - the products are lightweight and compact - able to absorb large amounts of water and activate on contact with water. We do not use glue, binders or latex in the production of our products.